PHARMACEUTICAL PRODUCT CATEGORY
Single-use fluid system design and selection covering Sani-Link Ultra Manifolds, Sani-Tech TA silicone overmolded tubing assemblies, PUPSIT filter integrity testing assemblies, Bio-Simplex sampling manifolds, final filling assemblies, and closed-container transfer.
SELECTION OVERVIEW
Integrate overmolded tubing, filters, connectors, bags, and filling ends into a verifiable fluid path for aseptic fluid transfer, sampling, filter integrity testing, and final filling.
AVAILABLE PRODUCTS
7 products. Confirm dimensions and suitability for the intended process.
Selection support →
Single-use systemsUses SIB® smooth-bore overmolding technology to form customizable branched manifolds from biopharmaceutical-grade silicone tubing, reducing hold-up zones, leak points, and on-site assembly steps associated with conventional connectors for complete sterile fluid-transfer systems.
Single-use systemsC-Flex pharmaceutical-grade TPE tubing is directly overmolded with polypropylene sanitary ports to form a single-use fluid connection assembly with low leakage and low extractables.
Single-use systemsSilicone overmolded tubing assemblies using SIB® smooth-bore technology and an integrated sealing structure to reduce connector dead spaces, leak points, and assembly steps, creating ready-to-install single-use flow paths.
Single-use systemsMade from pharmaceutical-grade C-Flex resin with tubing thermally bonded as an integrated assembly, for closed fluid transfer from media bottles, storage containers, and stainless-steel vessels.
Single-use systemsA customized single-use assembly for post-sterilization, pre-use integrity testing of sterilizing filters, with a complete aseptic flow path for wetting, gas testing, flushing, and primary/redundant filtration workflows.
Single-use systemsA multi-bottle single-use manifold system for aseptic process sampling. C-Flex® ADCF flow paths connect sample bottles, a purge bottle, EZ Top® closures, and vent filters, reducing cross-contamination and cleaning-validation burden.
Single-use systemsA custom single-use assembly for final-fill processes, using Saint-Gobain overmolding technology to integrate pump tubing, bags, distribution flow paths, connectors, and the filling end, improving flow-path integrity and reducing contamination risk.
CATEGORY GUIDE
A single-use system is more than a simple combination of tubing, filters, and connectors. Start with a fluid-path diagram that identifies bags, branches, filtration, pumping, sampling, flow measurement, equipment connections, and drain paths, then confirm all fluid-contact materials and Gamma irradiation compatibility as one system.
Sani-Link Ultra Manifolds, Sani-Tech TA, PUPSIT, sampling manifolds, and final filling assemblies can be combined around different process boundaries. Overmolded and pre-assembled delivery can reduce field connection points, hold-up zones, and open handling.
biopharmaceutical single-use system, Sani-Link Ultra Manifolds, Sani-Link manifolds, SIB smooth inner bore, Sani-Tech TA, silicone overmolded assembly, PUPSIT assembly, single-use sampling manifold, final filling assembly, overmolded fluid path, aseptic fluid transfer assembly
