PHARMACEUTICAL PRODUCT CATEGORY
Saint-Gobain pharmaceutical and clean-process composite tubing selection covering STHT-R, STHT-R-HD, SPD, FPW, Versilon TS, TB, TWOB, TLCT, CTLCT, PSTLCT, WTLCTPFA, G-FDA, and FGR.
SELECTION OVERVIEW
For high-pressure, vacuum, static-dissipative, chemical-resistant, CIP, SIP, and high-temperature fluid service, match braided-reinforced, wire-reinforced, and sanitary composite tubing structures made with FEP, PFA, PTFE, silicone, and elastomers.
AVAILABLE PRODUCTS
14 products. Confirm dimensions and suitability for the intended process.
Selection support →
Reinforced hoseMade with Sani-Tech® 65 biopharmaceutical-grade platinum-cured silicone and a heavy-duty reinforcement structure, this hose is designed for very high-pressure service while maintaining high purity and flexibility and supporting repeated sterilization, bulk fluid transfer, and critical biopharmaceutical applications.
Reinforced hoseCombines a white smooth FEP liner with polyester cord and EPDM rubber reinforcement for chemical resistance, kink resistance, full-vacuum capability, and high-pressure transfer in CIP, cleaning-agent, and process-chemical service.
Reinforced hoseUses a static-dissipative smooth PFA liner and reinforced outer layer for high-purity fluid and chemical transfer where static may be generated, combining low hold-up, chemical resistance, full-vacuum capability, and high-pressure performance.
Reinforced hoseUses a high-purity smooth FEP liner and an approximately 20 Ra smooth EPDM outer surface to reduce material hold-up and facilitate wipe-down cleaning for pharmaceutical, biopharmaceutical, and clean chemical process-fluid transfer.
Reinforced hoseUses an unpigmented high-purity PFA liner, EPDM rubber, polyester cord, and double-helix wire reinforcement for high-purity chemical and clean utility transfer, with broad chemical resistance, full-vacuum capability, and high-temperature performance.
Reinforced hosePharmaceutical-grade silicone hose with a multi-layer reinforcement structure and 316L stainless-steel spiral wire for high-pressure, full-vacuum, and high-flow transfer.
Reinforced hoseHigh-purity flexible hose with polyester-braid reinforcement and a platinum-cured silicone construction for biopharmaceutical fluid transfer, filtration, and single-use systems at higher pressures.
Reinforced hoseSingle polyester-braid-reinforced silicone hose for sanitary fluid transfer where a small bend radius, higher pressure, and CIP / SIP processing are required.
Reinforced hosePlatinum-cured silicone hose reinforced with four layers of polyester braid and stainless-steel spiral wire, combining high-pressure capability, full-vacuum performance, and a good bend radius.
Reinforced hoseA high-temperature sanitary suction and discharge hose with a white all-EPDM liner and double-helix wire reinforcement, suitable for high-purity water, CIP, and processes requiring high temperature and chemical resistance.
Reinforced hoseA sanitary suction and discharge hose with a white NBR/PVC nitrile-rubber blend liner and multi-layer fabric plus galvanized-wire reinforcement, offering oil resistance, chemical resistance, high-pressure capability, and full-vacuum service.
Reinforced hoseA sanitary fluid hose with a white smooth PTFE tube and 304 stainless-steel braid, balancing high flow, chemical resistance, kink resistance, and vacuum performance.
Reinforced hoseAn antistatic composite hose with a black conductive PTFE smooth-bore tube and 304 stainless-steel braid, suitable for gases, steam, and sanitary fluids prone to static generation.
Reinforced hoseA highly flexible composite hose with an open-pitch convoluted PTFE tube and 316 stainless-steel braid, balancing smooth flow, chemical resistance, cleanability, and vacuum service.
CATEGORY GUIDE
Braided reinforced silicone tubing suits clean fluid transfer that requires flexibility and higher working pressure. Wire-reinforced construction is better suited to full vacuum, large diameters, or collapse resistance. FEP, PFA, PTFE, EPDM, and NBR composite tubing should be selected together with chemical compatibility, temperature, and cleaning-process requirements.
Working and burst pressure values in catalogs are generally tied to diameter, temperature, and test conditions. The actual project should also verify the safety factor, minimum bend radius, end assembly, pulsation, dragging, and installation space.
pharmaceutical composite tubing, braided reinforced silicone tubing, heavy-duty reinforced silicone tubing, ultra-high-pressure pharmaceutical tubing, Sani-Tech STHT-R-HD, wire-reinforced tubing, FEP composite tubing, PFA composite tubing, static-dissipative PFA tubing, braided PTFE tubing, EPDM sanitary tubing, NBR sanitary tubing, Versilon TS, Versilon TWOB, Versilon TLCT, Versilon CTLCT, Versilon PSTLCT, Versilon WTLCTPFA
