PHARMACEUTICAL APPLICATION
For cleaning agents, disinfectants, purified water, steam, and return-flow service, select chemical-resistant, temperature-resistant, pressure-rated, and full-vacuum tubing, seals, and sanitary interfaces.
PROCESS CHALLENGES
SELECTION WORKFLOW
Confirm the operating envelope and compatibility of the complete fluid path.
Provide the name, concentration, temperature, and contact time for acids, alkalis, solvents, disinfectants, or steam.
Confirm pressure, vacuum, pulsation, bending, dragging, installation radius, and cycle count.
Select smooth-bore, drainable construction, sanitary interfaces, seal materials, and required regulatory documentation.
MATCHED PRODUCTS
A starting point for selection. Confirm each specification against the actual process and validation requirements.
Send process details →
Reinforced hoseMade with Sani-Tech® 65 biopharmaceutical-grade platinum-cured silicone and a heavy-duty reinforcement structure, this hose is designed for very high-pressure service while maintaining high purity and flexibility and supporting repeated sterilization, bulk fluid transfer, and critical biopharmaceutical applications.
Reinforced hoseCombines a white smooth FEP liner with polyester cord and EPDM rubber reinforcement for chemical resistance, kink resistance, full-vacuum capability, and high-pressure transfer in CIP, cleaning-agent, and process-chemical service.
Reinforced hoseUses a static-dissipative smooth PFA liner and reinforced outer layer for high-purity fluid and chemical transfer where static may be generated, combining low hold-up, chemical resistance, full-vacuum capability, and high-pressure performance.
Reinforced hoseUses a high-purity smooth FEP liner and an approximately 20 Ra smooth EPDM outer surface to reduce material hold-up and facilitate wipe-down cleaning for pharmaceutical, biopharmaceutical, and clean chemical process-fluid transfer.
Reinforced hoseUses an unpigmented high-purity PFA liner, EPDM rubber, polyester cord, and double-helix wire reinforcement for high-purity chemical and clean utility transfer, with broad chemical resistance, full-vacuum capability, and high-temperature performance.
Single-layer tubingCoextruded peristaltic pump tubing for metering cleaners, disinfectants, and chemicals, combining a chemical-resistant inner layer with a flexible outer layer for media compatibility and pump life.
Single-layer tubingPlatinum-cured silicone tubing for sanitary fluid transfer, with an ultra-smooth bore that helps reduce particle hold-up, micro-deposition, and extractables while improving cleaning and flow performance.
Single-layer tubingClear laboratory tubing made with a non-DEHP, bio-based plasticizer formulation, with resistance to flex fatigue and abrasion for instrument connections, venting, drainage, and general clean-laboratory fluid transfer.
Reinforced hoseSingle polyester-braid-reinforced silicone hose for sanitary fluid transfer where a small bend radius, higher pressure, and CIP / SIP processing are required.
FAQ
No. Material compatibility depends on the fluid, concentration, temperature, pressure, and contact time, and must be confirmed for the specific operating conditions.
Cleaning cycles can involve high temperature, pressure, vacuum, and repeated bending. Reinforced construction can improve dimensional stability and collapse resistance.
